Service hotline for faults and breakdowns

+49 151 10080258Mon to Fri 07:00 to 20:00 (CET), Sat and Sun if possible

Test benches and testing services

Test benches for maintenance and production.

All test benches

Test benchesNIKLAS Motor BenchTesting electric motors and fans NIKLAS Test FieldTest station to EN 50191 NIKLAS Pump BenchTesting pumps and fire pumps NIKLAS Drive BenchTesting gearboxes in load stages NIKLAS Vision CheckVisual inspection of parts with AI-assisted evaluation

Test equipment and softwareNIKLAS Test SoftwareAlso available for your own test station NIKLAS Safety OneSafety tester, new for 2027Testing servicesDGUV V3 and V4 inspectionInspecting machines, installations and equipment

NIKLAS Motor Bench

We test motors and fans at our plant. We design the test setup and evaluation around your test task.

Retrofit, service and machine safety

New system, modernisation or support during operation?

Discuss your project

RetrofitRetrofit and modernisationRenewing controls, drives and safety Control system migrationS5 and S7 to S7-1200, S7-1500 or BeckhoffServiceService and repairTroubleshooting, spare parts and installation NIKLAS CAREMaintenance and service packages for systems

CE and machine safetyCE markingCE after modification, declarations of incorporation and conformity Risk assessmentFor machine manufacturers and operators

Retrofit and modernisation

We look at your existing machine and then modernise controls, drives, operation and safety technology.

PLC, SCADA and software

Controls, visualisation and measurement data from a single source.

Discuss your project

Control systemsPLC and SCADAProgramming PLCs and networking systems Control system migrationS5 and S7 to S7-1200, S7-1500 or Beckhoff

SoftwareNIKLAS Test SoftwareAlso available for your own test station NIKLAS CNC SoftwareFor your existing machine Software developmentCustom software for your work processes

PLC and SCADA

We program PLCs, network systems and develop SCADA systems for operation, visualisation and evaluation.

Get to know NIKLAS

Company, references and careers.

Discuss your project

CompanyCompanyTeam in Barbing and Wörth an der Donau Our referencesSelected customers and projects from practice CareersJobs in engineering and sales

Locations

Administration & ManagementNeutraublinger Straße 13b
93092 Barbing

Production & AssemblyGewerbepark C2
93086 Wörth a. d. Donau

Company

Technical articles from practice

Methods, standards and common mistakes, clearly explained.

Latest articlesSurge testing11 min read PLC migration to S7-150016 min read Pump testing ISO 990616 min read Machinery Regulation 202714 min read

TopicsTest engineering7 articles Testing services1 article Machine safety1 article Retrofit1 article

Surge testing

Resonant circuit, test voltage to EASA AR100 and IEEE 522, error area ratio EAR, procedure and buying criteria: how the surge test finds interturn faults that other measurements miss.

Send enquiry Advice +49 941 56956720 Deutsch [email protected]

Test benches

Test equipment and software

Testing services

DGUV V3 and V4 inspection

Retrofit

Service

CE and machine safety

Control systems

Software

Latest articles

Topics

Two engineers discussing a design on screen

Company

The team behind NIKLAS Engineering & Service

We are Niklas Engineering & Service GmbH from Barbing near Regensburg, with manufacturing and assembly in Wörth an der Donau. Mechanical engineering, electrical engineering and automation work together in one team: we plan, design, program and commission installations.

Meet the team Discuss your project

Management and technical directors

Simon Niklas, Managing Director and Sales

Managing Director and Sales

Simon Niklas

Mechanical engineer, M.Sc.

Walter Niklas, Technical Director Electrical Engineering

Technical Director Electrical Engineering

Walter Niklas

Graduate engineer in electrical engineering, University of Applied Sciences

Daniel Hassfürther, Technical Director Design and Development

Technical Director Design and Development

Daniel Hassfürther

Mechanical engineer, M.Sc.

Electrical engineering and building services

Building services planner

Oliver Platzdasch

Electronics technician for energy and building technology

Design and development

Daniel Kuhn, Design and Development

Design and Development

Daniel Kuhn

Mechanical engineer, M.Sc.

Markus Stubenvoll, Design and Development

Design and Development

Markus Stubenvoll

Mechanical engineering technician

Christoph Kick, Design and Development

Design and Development

Christoph Kick

Mechanical engineer, M.Sc.

Moritz Hüttner, Design and Development

Design and Development

Moritz Hüttner

Mechanical engineer, M.Sc.

Batuhan Sener, Design and Development

Design and Development

Batuhan Sener

Mechanical engineer, B.Eng.

David Nitschmann, Design and Development

Design and Development

David Nitschmann

Mechanical engineer, B.Eng. in progress

Tell us about your task

Test task, machine or controls: we get back to you within four working hours.

Simon Niklas, your contact

Simon Niklas

Mechanical engineer, M.Sc.

+49 941 56956720 [email protected]

“Good engineering proves itself in day-to-day production. That is why we combine technical planning with a close understanding of process, operation and maintenance.”

Book a consultation